LANDFILL
HYDRAULIC STRUCTURES
PUBLIC WORKS
BUILDING CONSTRUCTION
MINING ENGINEERING
LANDFILL AFITER 3D

Use
The AFITER® 3D range is particularly well suited to :
- road infrastructure,
- capping waste storage facilities (ISD)
- hydraulic structures
It ensures that they blend in better with the landscape, by making it easier to plant them. This solution retains moisture, which encourages vegetation on slopes and embankments.
Installing this soil-retaining solution is extremely quick and easy, as it unrolls just like a standard geotextile.
The product does not need to be anchored or hooked into the slope. It only needs to be fixed at the top, and its flexibility means it can adapt perfectly to the slope.
MULTI-PURPOSES
• Soil retention,
• Erosion control,
• Revegetation,
• Puncture protection,
• Moisture retention,
• Séparation/filtration,
• Drainage (for the DRAINTUBE® version).
THE AFITER® 3D RANGE
AFITER® 3D G
combines a
reinforcement
geogrid with an antipuncture
nonwoven
geotextile. This is the
classic version of the
range.
AFITER® 3D T
The anti-puncture
geotextile is replaced by a
finer separation/filtration
geotextile, allowing roots
to pass through for deeper
root anchorage in the
embankment, ideal for
shrub-like vegetation.
AFITER® 3D DRAIN
In this variant drainage
function is added
to AFITER 3D® G is
combined with the
DRAINTUBE® drainage
geocomposite.
Benefits
- Multifunctional global solution.
- Reduced footprint by increasing slopes.
- High stability over time for greater durability of structures.
- Easier planting of structures to blend in with the landscape and a reduced carbon footprint.
- Quick and easy to install.
- Fights erosion and initial climatic impacts.
- Does not crush under the weight of soil.
- Large range of traction resistance, up to 450 kN/m.
- Large width (3.90 m) / roll lengths and layouts available on request.
Features





Characteristics
- Polyethylene geocomposite reinforced with high-tenacity polyester yarns and rigid polypropylene strips
- Width : 3 m
- Length : 100 m
- Traction resistance :up to 400 kN/m
FIND OUT MORE...
Projects completed with AFITER 3D
Soil retention in landfill

[Environment]
Earth retention on slopes (France)
30 000 m2
Soil retention on the waterproofing membrane has been a real challenge on this landfill site, as vegetation is required on the slopes of capping layer. The AFITER 3D solution was selected and installed on the slopes of the capping layer to retain the earth to a thickness of 30cm.
Retenue de terre en ISD

[Environment]
Retenue de terre sur étanchéité (La Réunion)
30 000 m2
La retenue de terre sur étanchéité est un réel défi sur les centres de stockage de déchet, du fait de l’obligation de végétalisation sur les talus des dômes. Pour permettre la retenue de terre sur une épaisseur de 30cm, la solution AFITER 3D a été retenue et mise en oeuvre sur les talus du dôme de couverture.